|
Drop Down Menu
|
|
We sell and ship in the United States only.
Includes Alaska, Hawaii, and U.S. territories such as Guam, US
Virgin Islands and Puerto Rico, and military APO and FPO addresses.
|
| |
|
Parts and Supplies for CD Players |
|
|
Laser Pickup KSS-210A, KSS210B,
KSS-212A, KSS212B
The most common CD laser pickup found today! The KSS-210A can also be used to replace the KSS-210B, KSS-212A and KSS-212B. Original Sony part number 8-848-062-11. Found in CD Players under many different brand names. Selling for up to $37.50 elsewhere. (Note: soldering capability and solder wick required to remove static-protection shorting link upon installation.) Not for use in Aiwa brand CD Players.
 Instructions for installation (PDF)
Note: No refunds are given on laser pickups.
Defective pickups are handled in accordance with the
manufacturers warranty (like for like replacement)
|
Laser Pickups KSS-213B
Very popular CD laser pickup found in many makes and models! Original Sony part number 8-848-379-31 and 8-848-482-02. Selling for up to $37.50 elsewhere. (Note: soldering capability and solder wick required to remove static-protection shorting link upon installation.)
Instructions for installation (PDF)
Note: No refunds are given on laser pickups.
Defective pickups are handled in accordance with the
manufacturers warranty (like for like replacement)
|
CD Player Jumper Film
Connection cable from the PC board to the laser pickup. This jumper is 8" long, 21/32" wide, and has 16 pins. It is designed to connect to either the KSS210, KSS212 or KSS213 series of laser pickups. Jumper film ends are rather fragile, so if the film has been disconnected and reinserted multiple times it may damage the ends and need replacing.
JFS-23 Jumper Film Strip - $3.95
|
|
General CD-Player Belt Kit
|
|
Contains the 10 most popular belts used in CD Players
|
|
Includes one each of the following sizes:
SBM2.5, SBM3.0, SBM3.2, SBM3.4, SBM3.6, SBM4.0, SBM4.2, SBM4.6, SBM5.0, SBM5.6
Note: Choose your kit carefully. Belt kits are NOT returnable.
|
|
|
|
SBS (Square Belt Small) belts are used in a few CD players, These belts are 1.2mm thick, roughly the thickness of a penny. I.C. (inside circumference) is shown in inches.
|
|
Part # |
I.C.* |
Thickness |
Price ea |
Purchase |
|
SBS2.1 |
2.1 |
.046" (1.2mm) |
$1.85 |
|
|
SBS2.4 |
2.4 |
.046" (1.2mm) |
$1.85 |
|
|
SBS2.6 |
2.6 |
.046" (1.2mm) |
$1.85 |
|
|
SBS3.0 |
3.0 |
.046" (1.2mm) |
$1.85 |
|
|
SBS3.2 |
3.2 |
.046" (1.2mm) |
$1.85 |
|
IMPORTANT: Measure and choose your belts carefully. Belts are NOT returnable.
Click here to learn how to correctly measure belts. |
|
IMPORTANT: Belts are measured in CIRCUMFERENCE - not diameter! Circumference is the distance AROUND the belt - not the distance across the belt. Click here to learn how to correctly measure belts. |
|
SBS3.5 |
3.5 |
.046" (1.2mm) |
$1.85 |
|
|
SBS4.0 |
4.0 |
.046" (1.2mm) |
$1.85 |
|
|
SBS4.6 |
4.6 |
.046" (1.2mm) |
$1.85 |
|
|
SBS5.1 |
5.1 |
.046" (1.2mm) |
$1.85 |
|
|
SBS5.6 |
5.6 |
.046" (1.2mm) |
$1.85 |
|
IMPORTANT: Measure and choose your belts carefully. Belts are NOT returnable.
Click here to learn how to correctly measure belts. |
|
IMPORTANT: Belts are measured in CIRCUMFERENCE - not diameter! Circumference is the distance AROUND the belt - not the distance across the belt. Click here to learn how to correctly measure belts. |
SBM (Square Belt Medium) belts are more typically found in CD players. I.C. (inside circumference) is shown in inches. Their thickness is about .065 inches (1.65mm) (about the thickness of a quarter).
|
|
Part # |
I.C.* |
Thickness |
Price ea |
Purchase |
|
SBM2.3 |
2.3 |
.065" (1.65mm) |
$2.00 |
|
|
SBM2.5 |
2.5 |
.065" (1.65mm) |
$2.00 |
|
|
SBM2.8 |
2.8 |
.065" (1.65mm) |
$2.00 |
|
|
SBM3.0 |
3.0 |
.065" (1.65mm) |
$2.00 |
|
|
SBM3.2 |
3.2 |
.065" (1.65mm) |
$2.00 |
|
IMPORTANT: Measure and choose your belts carefully. Belts are NOT returnable.
Click here to learn how to correctly measure belts. |
|
IMPORTANT: Belts are measured in CIRCUMFERENCE - not diameter! Circumference is the distance AROUND the belt - not the distance across the belt. Click here to learn how to correctly measure belts. |
|
SBM3.4 |
3.4 |
.065" (1.65mm) |
$2.00 |
|
|
SBM3.6 |
3.6 |
.065" (1.65mm) |
$2.00 |
|
|
SBM4.0 |
4.0 |
.065" (1.65mm) |
$2.00 |
|
|
SBM4.2 |
4.2 |
.065" (1.65mm) |
$2.00 |
|
|
SBM4.6 |
4.6 |
.065" (1.65mm) |
$2.00 |
|
IMPORTANT: Measure and choose your belts carefully. Belts are NOT returnable.
Click here to learn how to correctly measure belts. |
|
IMPORTANT: Belts are measured in CIRCUMFERENCE - not diameter! Circumference is the distance AROUND the belt - not the distance across the belt. Click here to learn how to correctly measure belts. |
|
SBM5.0 |
5.0 |
.065" (1.65mm) |
$2.00 |
|
|
SBM5.3 |
5.3 |
.065" (1.65mm) |
$2.00 |
|
|
SBM5.6 |
5.6 |
.065" (1.65mm) |
$2.00 |
|
You may be wondering how to measure the sizes of your existing belts. Click here
to find out how. |
Return to Home Page
Copyright ©2012 Studio Sound Electronics - All Rights Reserved
For our direct site for guitar amplifier electronic parts:
www.amprepairparts.com |