Sharp, JC Penney, and Realistic VCR replacement parts and rubber kits. Your VCR may have the Penny's or Realistic logo in place of the Sharp logo.  If you have doubts about this VCR being similar to yours please check the chassis photos below.    If you feel that we've made a mistake, please E-Mail us   and let us know. We have three replacement rubber kits for these Sharp manufactured VCRs. If you need a part for your Sharp built VCR that is not listed below, use our Parts Request Form to check with us.   We will list more parts as the catalog grows. MBK-01: Contains all three belts, Capstan/idler belt, load belt, and the counter belt.   The most common problem with bad belts is the VCR will fail when trying to go into play mode.   Bad belts can also cause the VCR to shut down while trying to power up.  Your price is  $4.20. See photo for location MBK-01T: Contains all three belts and the idler tire. The idler tire is the only part of the idler assembly that normally needs to be replaced.   Problems with a worn or glazed tire will usually cause FF/REW problems early.   As the tire gets worse it will open cause play back problems such as lines in the picture.   Your price is $5.00. See photo for location MBK-01PT: Contains all three belts, Capstan/Idler belt, load belt, and counter belt. This kit also contains a replacement idler tire and pinch roller. This kit is a complete rubber replacement kit for these Sharp built VCRs.   If the pinch has never been replaced you really need one.   If the capstan assy. has a black build up or the pinch roller has a hard glaze on it the roller has probably been slipping.   Your price is $11.95. See photo for location Top View Our MBK-01 Series of parts are for this Sharp Chassis Bottom View Our MBK-01 Series of parts are for this Sharp Chassis