Our MBK-75 series of parts covers about fifteen VCR models by Toshiba, GE, Proscan, and RCA. The on-line database has been set up to direct you to the proper rubber replacement or maintenance kit for your VCR.  Even though every precaution has been taken to assure the accuracy of the database, mistakes can be made.  If you have doubts about the pictured VCR being similar to yours please check the chassis photos below.  If you feel that we've made a mistake, please E-Mail us   and let us know. We have two rubber replacement kits for these VCRs that were manufactured by Thompson/Toshiba. MBK-75: Belt Kit Our MBK-75 kit contains both belts that are used in these VCRs.   The belts are used to drive the clutch that drives the idler and for loading and unloading.   Common problems are no play, poor picture, or lines in the picture   Since a belt also drives the gears that move the carriage cassette load and eject problems are also common with bad belts.   Your price for our MBK-75 kit is $2.95. See photos for belt locations. MBK-75P: Complete Rubber Kit This kit is a complete rubber replacement kit for these Toshiba built VCRs.   It contains both belts and the pinch roller.   If the pinch roller has never been replaced you really need one.   If the pinch roller has a hard glaze on it or the capstan shaft has a black build up on it the pinch roller has probably been slipping.   Your price for our MBK-75P kit is $9.95. See photos for parts locations. Top view of Toshiba Chassis Our MBK-75 Series of parts are for this chassis Bottom view of Toshiba Chassis Our MBK-75 Series of parts are for this chassis