Guitar Amp Handles

Click on photo for
larger view		 Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, BLACK WITH BLACK STITCHING
 Good replacement for Ampeg, Mesa Boogie, Randall™, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8-9/16 inches (8.57"), center-to-center mounting distance is 7-3/8 inches (7.38")   Black with black stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 or SC-403-4 screw pack.
Part #AH-281		 $23.95

"SHORTY" AMP HANDLE



Click on photo for
larger view		 Revisit™  "SHORTY" AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, BLACK WITH BLACK STITCHING
Similar to the AH-281 handle above, but 1-3/4 inches shorter.  Handle length is 6-13/16 inches (6.80"), center-to-center mounting distance is 6 inches (5.98")   Black with black stitching, nickel mounts.    Mounting screws not included - use SC-402 or SC-403-4  screw pack.   This is a great handle to consider for smaller combo amps, practice amps, etc.   Delivers a professional quality look and reliability in a smaller size for smaller amps.  More details
Part #AH-281-S  "Shorty"		 $12.95


Click on photo for
larger view		 Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DARK BROWN WITH BROWN STITCHING
 Good replacement for Ampeg, Mesa Boogie, Randall™, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark brown with brown stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 or SC-403-4 screw pack.
Part #AH-270		 $15.95

ONLY ONE HANDLE LEFT IN STOCK.   THIS HANDLE IS BEING DISCONTINUED.


Click on photo for
larger view		 Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, TAN WITH TAN STITCHING
 Good replacement for Ampeg, Mesa Boogie, Randall™, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Tan with tan stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 or SC-403-4 screw pack.
Part #AH-108		 $23.95


Click on photo for
larger view		 Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DARK BROWN WITH WHITE STITCHING
 Good replacement for Ampeg, Mesa Boogie, Randall™, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark brown with white stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 or SC-403-4 screw pack.
Part #AH-318		 $23.95


Click on photo for
larger view		 Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DEEP NAVY BLUE-GREY WITH WHITE STITCHING
 Good replacement for Ampeg, Mesa Boogie, Randall™, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark navy blue-grey with white stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 or SC-403-4 screw pack.
Part #AH-319		 $23.95



Click on photo for
larger view		 Revisit™ BLACK GUITAR AMP HANDLE, WITH HARDWARE.   Rugged rubber black handle strap, steel reinforced.  Black metal caps.   Black 10-32 screws and  T-Nut mounting hardware are included.  Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 to 8 3/8 inches apart.   Total length of handle when properly mounted is 10 1/4".  Great replacement for the Budda Superdrive 30 (Series 1 only, pre-Peavey).  
Part #GAH-271B		 $11.99  



Click on photo for
larger view		 Revisit™ GUITAR AMP HANDLE - BLACK.  Rugged rubber black handle strap, steel reinforced.  Black metal caps.   Screws not included - recommend using our SC-403B 10-32 type screws along with a 10-32 T-Nut for secure mounting.  Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 to 8 3/8 inches apart.   Total length of handle when properly mounted is 10 1/4".   Makes a good economical replacement for black strap/black end cap large Marshall™ handles (JCM900, JCM2000, JVM, larger ValveState, some later JCM800's)  
Part #GAH-1		 $10.99  




Click on photo for
larger view		 Orange™ AMP BLACK GUITAR AMP HANDLE.  Black rubber handle strap, metal reinforced.  Black rubber caps.   Screws not included - recommend using the SC-403B black 10-32 type screws along with a 10-32 T-Nut for secure mounting.   See diagram for handle dimensions and center-center screw distance.    Fits most Orange Amplifiers.   Also fits some Markbass amplifiers.


Part #OAH-456

 $10.99  


Click on photo for
larger view

 BLACK HANDLE SCREWS
 Pack of 2 stainless-steel handle screws finished in satin black for use with black end-cap handles, such as our GAH-1, OAH-456 or GAH-271B.  1" Long, 10-32 threads, finished in satin black to match black end caps.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".   See Data Sheet here
Part #SC-403B		 $0.99
(for a pack of 2 screws)		  



Click on photo for
larger view		 Revisit™ NICKEL/BLACK GUITAR AMP HANDLE - NICKEL, WITH HARDWARE.  Rugged rubber black handle strap, steel reinforced.  Polished nickel metal caps.   10-32 screws and  T-Nut mounting hardware are included. Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 inches apart.   Total length of handle when properly mounted is 10 1/4".  Not recommended for Fender, as the screws are set too far apart for Fender™ amp specifications.
Part #GAH-271C		 $10.99  


BLACK FENDER HANDLE
Click on photo for
larger view		 ORIGINAL BLACK Fender™ GUITAR AMP HANDLE.  Black amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps.   Includes mounting hardware (two screws and T-nuts).  Introduced on Blonde, Brown, and Blackface™-era Fender™ amplifiers.  Used on 65 Twin Reverb™, 65 Deluxe Reverb™, 65 Super Reverb™, 65 Princeton Reverb™, 64 Vibroverb Custom, Custom Vibrolux™, Vibro-King™ 212 Enclosure, Blues Junior™, Pro Junior™, Acoustasonic™ Jr. DSP, Acoustasonic 30, Acoustasonic SFX II, Bassman™ 25, Bassman 60, Jazzmaster Ultralight™ Enclosure, Princeton 650™, Cyber Champ™, Rumble™ 112, Rumble 2x8, Super-Sonic™ 100 Head, Super-Sonic Twin, Super Champ™ X2/XD, and Bullet 15 DSP amplifier.  Fits most vintage and modern amplifiers.  7 3/4"  center to center screw placement.  9 1/4" handle length without end caps.   Original Fender™ part number 0990947000.  
Part #FAH-332		 $17.99  


BROWN FENDER HANDLE
Click on photo for
larger view		 ORIGINAL BROWN Fender™ GUITAR AMP HANDLE.  Brown amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps.   Includes mounting hardware (two screws and T-nuts).  Introduced on some Blonde and Brownface-era Fender™ amplifiers.  7 3/4"  center to center screw placement. 9 1/4" handle length without end caps.   Original Fender™ part number 0990944000.  
Part #FAH-944		 $16.99


Click on photo for
larger view		 GUITAR AMP HANDLE - SIMILAR TO Fender™ HANDLE.  Black handle strap, metal reinforced.  Nickel metal caps - may be used as replacement for vintage and reissue Fender™ amps.   Handle strap is 7/8" wide.   Designed for screw holes set 7 3/4 inches apart.   Looks similar to the original Fender™ part number 0990947000.   Screws and T-Nuts included.
Part #FAH-261		 $8.49  


Click on photo for
larger view		 ORIGINAL 4-SCREW Fender™ GUITAR AMP HANDLE.  Black handle strap, metal reinforced, with nickel-plated end caps - two screws in each end cap.   Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, 65 Twin Custom™, 94 (Evil) Twin™, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, Power Chorus, and Bassman™ 300 amplifiers  Includes mounting screws and nuts.  Fender™ part number 0990948000.  8" center to center. 9 1/4" handle length without end caps.  Also fits some some Music Man heads and combo amps.
Part #FAH-264		 $19.95  


Click on photo for
larger view

 Fender™ VINTAGE HANDLE SCREWS
 Pack of 2 stainless steel handle screws for Fender™ style FAH-332, FAH-261 handle.   1" Long, 10-32 threads.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".  See Data Sheet here
Part #SC-403		 $0.99
(for a pack of 2 screws)		  


Click on photo for
larger view

 Fender™ EXTRA LONG VINTAGE HANDLE SCREWS
 Pack of 2 stainless steel extra long handle screws for Fender™ style FAH-332, FAH-261 handle.   Used for vintage Fender™ style strap handles used on speaker cabinets, such as Bandmaster, Bassman, Showman, and Blonde or Blackface Tremolux.  1-1/4" Long, 10-32 threads.   Designed to work with a 10-32 T-Nut, in cabinet wood of 1-1/8" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 1-1/8".  See Data Sheet here
Part #SC-403A		 $0.99
(for a pack of 2 screws)		  


(Brown)

 Click on photo for
larger view		 Fender™ STYLE GUITAR AMP HANDLE.  Brown handle strap, "dogbone" style. Nickel end hooks - replacement for vintage and modern Fender™ amps.   Replacement for Fender™ part number 0990946000.   Does not contain Fender™ logo, so it may be used on other brands of amps.  Used on vintage and modern brownface and blonde tolex amps such as the 59 Bassman, Hot Rod Deluxe, Blues Deluxe, Blues Deville, Super-Sonic etc.   Color of handle strap is brown.   Screws not included - order the pack of four SC-402 screws found here.
Part #FAH-328		 $7.99  


(Black)

Click on photo for
larger view		 Fender™ STYLE GUITAR AMP HANDLE.  Black handle strap, "dogbone" style. Nickel end hooks - replacement for vintage and modern Fender™ amps.   Replacement for Fender™ part number 0990943000.   Does not contain Fender™ logo, so it may be used on other brands of amps.  Used on vintage and modern black tolex amps such as the Hot Rod Deville, Blues Deluxe, Blues Deville, Super-Sonic, etc.   Color of handle strap is black.   Screws not included - order the pack of four SC-402 screws found here.
Part #FAH-329		 $7.99  


Click on photo for
larger view

 Fender™ "DOGBONE" HANDLE SCREWS
 Pack of 4 nickel "Dogbone" handle screws for Fender™ style FAH-328 and FAH-329 handles.     8-32 thread.  Fits the handle on the Fender™ Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, and Blues Deville, as well as other Fender™ amps of similar design.  Also works with Hiwatt handles and other British design amp handles.
Part #SC-402		 $1.59
(for a pack of 4 screws)		  


Click on photo for
larger view

 10-32 THREAD HANDLE SCREWS
 Pack of 4 stainless steel handle screws for handles which require 4 screws.   1" Long, 10-32 threads.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".  See Data Sheet here
Part #SC-403-4		 $1.95
(for a pack of 4 screws)		  



Click on photo for
larger view		 Premium-quality steel T-nuts feature three razor-sharp teeth and 8-32 fine thread.  Works with all 8-32 screws - recommended for mounting many guitar amp handles.   Pack of 4 nuts.
Part TNUT-832		 99 cents
(pack of 4)		  



Click on photo for
larger view		 Fender™ VINTAGE STYLE GUITAR AMP HANDLE, RAISED, MEDIUM BROWN STITCHED SIMULATED LEATHER.
Medium brown simulated leather handle strap, replacement for Fender™ "tweed" style amps (as well as other vintage amps).  Has slight "raised" bump near the center of the handle.   Medium brown, white stitched.  5-7/8" from post position to post position, total length of strap when completely flat is 8-3/4".    Comes complete with two nickel-plated handle mounts and four screws. 
Part #GAH-282		 $18.95  



Click on photo for
larger view		 Fender™ or Ampeg™ VINTAGE STYLE GUITAR AMP HANDLE, RAISED, BLACK STITCHED SIMULATED LEATHER. Black raised handle strap, made of simulated leather, replacement for Fender™ "tweed" style amps or vintage Ampeg amps (as well as other vintage amps).  Has slight "raised" bump near the center of the handle.   Black, white stitched.  5-7/8" from post position to post position, total length of strap when completely flat is 8-3/4".   Mounts and screws are included.
Part #GAH-782		 $18.95


Click on photo for
larger view		 GENUINE PEAVEY BLACK ENDS /BLACK STRAP GUITAR AMP HANDLE.  Black handle strap, metal reinforced.  Black metal caps.   Screws and T-Nuts are NOT included.  Screws and T-Nuts to fit are found here.  Handle strap is 7/8" wide.   Designed for screw holes set 7 3/4 inches apart.   Total length of handle when properly mounted is 9 1/2 inches. 
Part #PAH-301		 $11.95  



Click on photo for
larger view		 GENUINE PEAVEY CHROME ENDS /BLACK STRAP GUITAR AMP HANDLE.  Black handle strap, metal reinforced.  Chrome metal caps.   Screws and T-Nuts are NOT included.  Screws and T-Nuts to fit are found here.  Handle strap is 7/8" wide.   Designed for screw holes set 7-3/4 inches apart.   Total length of handle when properly mounted is 9-1/2 inches. 
Part #PAH-302		 $10.95  


Click on photo for
larger view		 MARSHALL™ HANDLE STRAP FOR JCM900, JCM2000, ETC HEAD.  Original Marshall™ handle strap for the MAH-294 Handle. Sold individually.  Includes metal strap insert and rubber strap.   Genuine Marshall.    Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the worn strap!  Ends and clamps not included.
Part #MHS-294		 $7.95
(each)


Click on photo for
larger view		 MARSHALL™ END CAPS FOR MAH-294 HANDLE.  Handle end caps for the MAH-294 Handle. Sold in sets of two caps.   NOTE:  DOES NOT HAVE THE MARSHALL LOGO ON THE CAPS.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, screws and clamps not included.   Set of two end caps.
Part #MHC-294-2		 $4.95
(for a set of 2 end caps)


Click on photo for
larger view		 MARSHALL™ INTERNAL END CLAMPS FOR MAH-294 HANDLE.  Handle internal clamps for the MAH-294 Handle. Sold in sets of two end clamps.   Genuine Marshall.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, black end caps, screws and strap not included.   Note:  These are unfinished metal caps - designed to be used only with the snap-on MHC-294-2 end caps.  Set of two end clamps.
Part #MIC-294-2		 $2.99
(for a set of 2 end clamps)


Click on photo for
larger view

 Marshall™ METRIC HANDLE SCREWS
 Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Original Marshall™ , designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404		 $1.99
(for a pack of 2 Marshall™ metric screws)		  


Click on photos for
larger view

(Assembled)

Marshall™ HANDLE
Genuine Marshall™ Handle for modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Original Marshall™ part number M-PACK-00031.    Kit contains:

  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm

  • (2) Mounting brackets
  • (2) Black bracket covers with Marshall™ logo
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #MAH-294

 

 $21.95

DISCONTINUED BY THE "NEW" MARSHALL GROUP

 SEE THE RAH-294 (BELOW) AS AN ALTERNATIVE

 



Click on photos for
larger view


(Assembled)
 Marshall™ AFTERMARKET HANDLE
Identical to the Genuine Marshall™ Handle MAH-294, except does not have the "Marshall" name imprinted on the end caps.   Save compared to the price of the original Marshall™ handle.  For modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Replaces Original Marshall™ part number M-PACK-00031 or stock number MAH-294.    Kit contains:
  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm
  • (2) Mounting brackets
  • (2) Black bracket covers (no Marshall™ logo)
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #RAH-294

 $15.99  


Click on photo for
larger view

 Marshall™ METRIC HANDLE SCREWS
 Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Original Marshall™ , designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404		 $1.99
(for a pack of 2 Marshall™ metric screws)		  



Click on photos for
larger view
 VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-287

 $19.99  



Click on photos for
larger view
 VINTAGE Revisit™ REISSUE SILVER/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Silver color bracket covers
  • (1) Rubber handle strap with metallic insert, silver ends
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-355

 $19.99



Click on photos for
larger view
 VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE REPLACEMENT STRAP - Marshall™ JCM-800 style
The strap part only of handle part number MAH-287.   Used on some early Marshall™ JCM800 series amps.  11 inches, end-to-end.

Part #MHS-295

 $13.95




Click on photos for
larger view
 VINTAGE Revisit™ REISSUE GOLD HANDLE END CAP - Marshall™ JCM-800 style
One end cap only of handle part number MAH-287.   Used on some early Marshall™ JCM800 series amps.   Sold individually.  Note:   We urge you to also replace the MIC-295 internal clamp at the same time.   These end caps may not lock securely on old internal clamps, making the end caps randomly pop off when lifting the amp by its handle.

Part #MHC-295

 $1.95
(for one end cap)

Quantity:



Click on photos for
larger view

VINTAGE Revisit™ REISSUE HANDLE INTERNAL CLAMP - Marshall™ JCM-800 style
One internal clamp only of handle part numbers MAH-287 or MAH-355.   Used on some early Marshall™ JCM800 series amps.   Sold individually.

Part #MIC-295

 $1.60
(for one clamp)

Quantity:



Click on photos for
larger view
 VINTAGE Revisit REISSUE GOLD/BLACK HANDLE - JMP, JTM "PLEXI"
Handle for vintage Marshall™ heads and combo amps.   Replacement for the original Marshall™ JMP, JTM "Plexi" series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9".
  • Overall length of assembled and mounted handle is 10.7" (272mm).
  • Mounting screws are NOT included

Part #MAH-288

 $23.95  



Click on photo for
larger view		 Premium-quality steel T-nuts feature six razor-sharp teeth and extra-long barrels.  1/4"-20 coarse thread. The result is a T-nut that goes in straighter and holds tighter than ordinary T-nuts. As a bonus, the 6-prong design ensures that your T-nut will stay in place even when working at the edge of a driver hole. We guarantee that these are the finest T-nuts that you will find on the market. Recommended hole size is 1/4", thread is 10-32, barrel length is 11mm, or about 7/16".     Pack of 4 nuts.
Part 6-TNUT-1032		 $1.59
(pack of 4)		  

 

Click on photo for
larger view

Choose from Black, Tan, or Havana Brown

Mesa/Boogie™  AMP HANDLE, HEAVY-DUTY STITCHED
Original Mesa/Boogie™  replacement handle.   Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38").   Vintage Leather-look style.  Available colors:  Black with black stitching, tan with tan stitching, Havana Brown with white stitching.  Nickel mounts.   More details   Mounting screws not included - use SC-403 screw pack.   Choose handle color in 'Select Color' box.
Part # MBH-X		 $16.95
Select Color:


Quantity:

 

Click on photo for
larger view

Choose from Black or Nickel End Caps & Screws

Mesa/Boogie™  AMP STRAP HANDLE KIT WITH SCREWS, NICKEL OR BLACK END CAPS
 Original Mesa/Boogie™  replacement handle with hardware included.   Rugged rubber black handle strap, steel reinforced.  Your choice of polished chrome or black oxide metal caps with matching screws.  Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 inches apart.   Total length of handle when properly mounted is 10 1/4".   Screws are 10-32 thread.  Choose end cap and screw color in 'Select Color' box.
Part # MBH-271-X		 $12.95
Select Color:


Quantity:


(Black)

 Click on photo for
larger view		 Vox™ STYLE GUITAR AMP HANDLE.  Black handle strap, "dogbone" style, diamond pattern, with brackets. Nickel end hooks - replacement for vintage and modern Vox™ amps.  Does not contain Vox™ logo, so it may be used on other brands of amps.  Center to center measurement is 6 1/4 inches.  Color of handle strap is black.   Screws not included - you might consider the pack of four SC-402 screws found here.   Note that some vintage Vox™ amps may have used a different thread type than the 8-32 thread of the SC-402 screws.
Part #VAH-327		 $6.95  


Click on photo for
larger view		 HANDLE MOUNTING KIT - FOR STRAP HANDLES    Complete set of hardware for mounting one leather style strap handle, including machine screws and T-Nuts.    Excellent for repairing strap handles where the old wood screws have pulled out of their holes.   Remove amp chassis, drill new holes with 3/16" or 5mm drill bit, tap in T-Nuts on the underside and mount the handle.    Fits Fender™ "tweed" style amps and some vintage Ampeg™ amps.   Works with our handles GAH-282, GAH-782.

Part #THH-2

 $4.95  

Copyright ©2024 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov