Amp & Cabinet Logos

 

People ask ...  Why are replacement logo badges so expensive?
 
Replacement or custom amplifier logos can be surprisingly expensive due to low production volume and specialized manufacturing methods. The specific material and process can also significantly drive up the price. 
 
  • Manufacturing methods: The way a logo is produced heavily influences its cost. For example, processes like laser engraving, 3D printing, or screen-printing on specific materials require specialized equipment and expertise.
  • Brand reputation and licensing: For official brand-name logos, such as Marshall or Fender, a portion of the price can be attributed to licensing fees and the perceived value of the brand itself. In some cases, a used amp with a logo can be sold for less than the cost of a replacement logo badge.

  • Click on photo for
    larger view
    PEAVEY LOGO BADGE.  Peavey logo, plastic, as found on many Peavey models.   160mm long X 80mm tall (about 6-1/4" X 3-1/8").   Mounting screws not included.

    Part #PV-L100

    $17.95
    In stock


    Click on photo for
    larger view
    PEAVEY LOGO BADGE.  Peavey logo, aluminum, as found on many Peavey models.   182mm long X 36mm tall (about 7-1/8" X 1-3/8").   Made for attaching with adhesive or double-stick tape.    Not recommended for attachment to rough surfaces like Tolex or speaker grill cloth.  Adhesive / double-stick tape not included.

    Part #PV-L200

    $17.95
    In stock


    Click on photo for
    larger view
    Fender™ Amp Tweed Block Logo Revive the look of your vintage-style or modern Fender™ amp with a genuine Fender™ amplifier logo.
    Fender™ tweed amp logo includes mounting pins and is designed for the following amplifiers:   Pro Junior™, Blues Junior™, JazzMaster™ Ultralight
    . Approx. 2 15/16" wide and 7/8" tall.   Original Fender™ part number 0994096000.
    Part #FAL-917
    $25.95
    In stock
     


    Click on photo for larger view
    Fender™ AMP "TAIL" LOGO.  New original Fender™ reproduction.   Fender™ logo with "tail", cast metal.   Similar to the original logo found on blackface amps from the 1960s.  Used on the upper left corner of the grill cloth on most blackface era Fender™ amps.  Approx. 4 1/2" wide, the "F" in the logo is about 2 1/2" inches tall.  Original Fender™ part number 0994093000.   Mounting screws are included.
    Part #FAL-912
    $25.95
    In stock
     


    Click on photo for
    larger view
    Fender™ AMP LOGO, FLAT BLACK. New original Fender™ reproduction, used in many recent and current model Fenders. "Flat" Fender™ logo, with black "tail", cast metal, mounting screws included.  Used on the upper left corner of the grill cloth on some recent and vintage era Fender™ amps.  Approx. 5 1/2" wide, the "F" in the logo is about 2 7/8" inches tall.   Original Fender™ part number 0994095000.
    Part #FAL-916
    $25.95
    In stock
     


    Click on photo for
    larger view
    Fender™ AMP LOGO, FLAT BROWN. New original Fender™ reproduction, used in many recent and vintage model Fenders. "Flat" Fender™ logo, with brown "tail", cast metal, mounting screws included.  Used on the upper left corner of the grill cloth on most Fender "brownface" and "blonde" series amps.  Approx. 5 1/2" wide, the "F" in the logo is about 2 7/8" inches tall.   Original Fender™ part number 0994092000.  Special order, ready to ship in 4-5 days.
    Part #FAL-911
    Special order!
    Ready to ship in 4-5 days.

    $25.95
     

     


    Click on photo for
    larger view
    Marshall™ LOGO, WHITE PLASTIC, 6" LONG
    The mini Marshall™ logo - smallest size.    As used on the DSL201 combo, DSL401 combo, some of the smaller sized MG series combos, VS15, VS30R, 1912 Cab, JCM600, JCM602, AS50, 3005, 4501, 5005, 8010, 8015, MG10, MG10MKII, MG15RCD, MG30RCD, MG215RCD, TSL602, JCM3005, and some other models.    This logo is 6" long - please measure the old logo in order to ensure that you order the correct size.
    Part #ML-601
    $38.95
    In stock


    Click on photo for
    larger view
    Marshall™ LOGO, WHITE PLASTIC, 9" LONG
    The 9 inch long Marshall® logo - medium size.    As used on the 1922, TSLC212, 4203, 4502, 5002, 5010, 5205, 8020, 8040, 8100, AVT50, AVT50H, AVT150, JVM410, MG412A, 2266C, VS100RH, VS102R, VS112, VS230, VS232, VS265, TSL122, 5275, B150, 3203, MG100RCD,  and some other models  This logo is 9" long - please measure the old logo in order to ensure that you order the correct size.   Does NOT fit most Marshall® heads, does NOT fit the larger MG series amps.
    Part #ML-901
    $38.95
    In stock


    Click on photo for
    larger view
    Marshall™ LOGO, WHITE PLASTIC, 11" LONG
    The 11 inch long Marshall™ logo - large size.  As used on the 2100, 2205, 2203, 2204, 2210, 2550, 2553, 2554, 2558, 4102, 4001, 4210, 4211, 4212, 4100, 4101, 4103, 4010, 4500, 5213, 5210, 5212, DSL100,  1986, 1960B cabinet, 1959JMP, 1936, TSL100, 6100, 6101, JCM1959, 2558V, 3005, 2555SL, AS1960, 2100SLX, TSL60, 1987JCM,  DSL50, 3005, 1960AX,  and some other models  This logo is 11" long - please measure the old logo in order to ensure that you order the correct size.   
    Part #ML-1101
    $39.95
    In stock

    Vox™ Logo
    Original VOX™ large logo, fits the AC30. Made of plastic in bright gold color. 34mm H X 107mm W (about 1-3/8" X 4-1/4").  Special order, ready to ship in 4-5 days.
    Part #VL-701

    Special order!
    Ready to ship in 4-5 days.

    $32.95

    Ampeg™ Logo
    Genuine Ampeg™ Script Logo made of metal for installation on amplifiers. 6.31" W X 0.84" H.   Chrome color, replacement for logo on vintage Ampeg amplilfiers from the 1960s such as the Super Echo, GS-12 Rocket, B-12XT Portaflex, B-15 fliptop, and many others.  Special order, ready to ship in 4-5 days.
    Part #VL-701

    Special order!
    Ready to ship in 4-5 days.

    $35.95


    Click on photo for
     larger view
    Ampeg™ "a" Logo
    Used on modern Ampeg Speaker Cabinets, this 3 inch x 4 inch plastic logo is affordably priced.   Mounting screws not included.   Use LS-504 for mounting screws.  Mounting centers are
    2 1/4" x 2 ⅜".
    Part #AL-921
    $5.95
    In stock


    Click on photo for
     larger view
    Sunn™ Logo
    Genuine Sunn Amplification logo plate. The plate is used on the new production 100S, 200S, concert lead 1, concert lead 2 amps as well as the 112F, and 212F speaker cabinets. This logo badge also matches those found on many of the vintage Sunn amps. Mounting screws (LS-504) sold separately.  Special order, ready to ship in 4-5 days.
    Part #SL-500

    Special order!
    Ready to ship in 4-5 days.

    $17.95



    Click on photo for
     larger view
    Black Logo Mounting Screws
    Set of 4 logo mounting screws.  
    These are #5 x 7/16" black oxide screws, set of 4.    Fit the AL-921 Ampeg logo, and the Fender FAL-912 logo.
    Part #LS-504
    $0.99
    (for a set of 4 screws)


    Copyright ©2025 Studio Sound Electronics - All Rights Reserved
    Not responsible for web site errors or omissions.

    All company names, logos and product names mentioned on these pages are trademarks of their respective owners.
      WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
    For more information go to www.P65Warnings.ca.gov