Marshall™
Corners & Handles

Click on photo for
larger view		 GENUINE Marshall™ CORNERS, FRONT OF CABINET - HIGH GLOSS FINISH
Front corner set, 3/4" radius. Includes 12 gold rivets for attaching to cabinet.  For heads, combos and straight speaker cabinets.   Will not fit slanted speaker cabinets, such as the 1960A.  For slanted cabinets, see the MC-1092 set.
Part #MC-1091		 $10.95
(For a set of 4 corners with 12 rivets)


Click on photo for
larger view		 Revisit™ Quality Reproduction of Marshall™ CORNERS, FRONT OF CABINET - MEDIUM GLOSSY FINISH
 Front corner set, 3/4" radius.  Rivets not included - purchase those separately below.  For Marshall™ heads, combos and straight speaker cabinets.  Replace your Marshall™ corners with quality parts at less than Marshall™ prices.   Will not fit slanted speaker cabinets, such as the 1960A.  For slanted cabinets, see the MC-1092 set.
Part #RC-1091		 $6.95
(For a set of 4 front medium glossy corners - rivets purchased separately)


Click on photo for
larger view		 Revisit™ Quality Reproduction of Marshall™ CORNERS, FRONT OF CABINET -MATTE SEMI-GLOSS FINISH
 Front corner set, 3/4" radius.  The matte finish  is much less susceptible to unsightly scratches than a glossy finish.   Rivets not included - purchase those separately.  For Marshall™ heads, combos and straight speaker cabinets.  Replace your Marshall™ corners with quality parts at much less than Marshall™ prices.   Will not fit slanted speaker cabinets, such as the 1960A.  For slanted cabinets, see the MC-1092 set.
Part #RC-1081		 $6.95
(For a set of 4 front matte corners - rivets purchased separately)


Click on photo for
larger view		 GENUINE Marshall™ SPECIAL CORNERS, FRONT OF SLANTED SPEAKER CABINETS - HIGH GLOSS FINISH
 Front corner set, 3/4" radius. Includes 12 gold rivets for attaching to cabinet.   Two top angled corners for the left and right top corners of angled speaker cabinets, and two straight corners for the bottom front corners.  For slanted speaker cabinets ONLY, such as the 1960A, MG412AG, MX412A
Part #MC-1092		 $16.95
(For a set of 4 corners with 12 rivets)


Click on photo for
larger view		 GENUINE Marshall™ CORNERS, REAR OF CABINET - HIGH GLOSS FINISH
 Rear corner set, 3/4" radius. Includes 16 gold rivets for attaching to cabinet.  For heads, combos and speaker cabinets.  

Part #MC-1090		 $11.95
(For a set of 4 corners with 16 rivets)


Click on photo for
larger view		 Revisit™ Quality Reproduction of Marshall™ Corners, Rear of Cabinet - Medium Glossy Finish  Rear corner set, 3/4" radius. Rivets not included - purchase those separately below. For Marshall™ heads, combos and speaker cabinets.   Replace your Marshall™ corners with quality parts at less than Marshall™ prices.

Part #RC-1090		 $6.95
(For a set of 4 rear medium glossy corners - rivets purchased separately)		  


Click on photo for
larger view		 Revisit™ Quality Reproduction of Marshall™ CORNERS, REAR OF CABINET -MATTE SEMI-GLOSS FINISH  Rear corner set, 3/4" radius. The matte finish is much less susceptible to unsightly scratches than a glossy finish.  Rivets not included - purchase those separately.  Replace your Marshall™ corners with quality parts at much less than Marshall™ prices.

Part #RC-1080		 $6.95
(For a set of 4 rear textured corners - rivets purchased separately)		  


Click on photo for
larger view		 Revisit™ GOLD RIVETS - SET OF 12
 For attaching Marshall™ corners to cabinets.  Gold, package of 12 rivets.
Part #MR-109-12		 $4.95
(For a set of 12 gold rivets)


Click on photo for
larger view		 Revisit™ GOLD RIVETS - SET OF 4
 For attaching Marshall™ corners to cabinets.  Gold, package of 4 rivets.
Part #MR-109-4		 $1.95
(For a set of 4
gold rivets)


Click on photo for
larger view		 Revisit™ SILVER RIVETS
 For attaching Marshall™ corners to cabinets.  Silver, package of 12 rivets.
Part #MR-109S-12		 $4.95
(For a set of 12 silver rivets)


Click on photo for
larger view		 Revisit™ SILVER RIVETS - SET OF 4
 For attaching Marshall™ corners to cabinets.  Silver, package of 4 rivets.
Part #MR-109-4		 $1.95
(For a set of 4 silver rivets)


Click on photo for
larger view		 MARSHALL™ HANDLE STRAP FOR JCM900, JCM2000, ETC HEAD.  Genuine Marshall handle strap for the MAH-294 Handle. Sold individually.  Includes metal strap insert and rubber strap.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the worn strap!  Ends and clamps not included.
Part #MHS-294		 $7.95
(each)


Click on photo for
larger view		 MARSHALL™ END CAPS FOR MAH-294 HANDLE.  Handle end caps for the MAH-294 Handle. Sold in sets of two caps.   NOTE:  DOES NOT HAVE THE MARSHALL LOGO ON THE CAPS.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, screws and clamps not included.   Set of two end caps.
Part #MHC-294-2		 $4.95
(for a set of 2 end caps)


Click on photo for
larger view		 MARSHALL™ INTERNAL END CLAMPS FOR MAH-294 HANDLE.  Handle internal clamps for the MAH-294 Handle. Sold in sets of two end clamps.   Genuine Marshall.  Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, black end caps, screws and strap not included.   Note:  These are unfinished metal caps - designed to be used only with the snap-on MHC-294-2 end caps.  Set of two end clamps.
Part #MIC-294-2		 $2.99
(for a set of 2 end clamps)


Click on photo for
larger view

 Marshall™ METRIC HANDLE SCREWS
 Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Genuine Marshall, designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404		 $1.99
(for a pack of 2 Marshall™ metric screws)		  


Click on photos for
larger view

Genuine Marshall™ HANDLE
Genuine Marshall™ Handle for modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Genuine Marshall™ part number M-PACK-00031.    Kit contains:

  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm

  • (2) Mounting brackets
  • (2) Black bracket covers with Marshall™ logo
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #MAH-294

 $19.95



Click on photos for
larger view


(Assembled)
 Marshall™ AFTERMARKET HANDLE
Identical to the Genuine Marshall Handle MAH-294, except does not have the "Marshall" name imprinted on the end caps.   Save compared to the price of the Genuine Marshall handle.  For modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Replaces Genuine Marshall part number M-PACK-00031 or stock number MAH-294.    Kit contains:
  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm
  • (2) Mounting brackets
  • (2) Black bracket covers (no Marshall™ logo)
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #RAH-294

 $13.99  


Click on photo for
larger view

 Marshall™ METRIC HANDLE SCREWS
 Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Genuine Marshall, designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404		 $1.99
(for a pack of 2 Marshall™ metric screws)		  


Click on photo for
larger view

Marshall™ LATER MODEL DSL / VALVESTATE HANDLE, BLACK

Genuine Marshall™ DSL style amp handle for later DSL series amps and some Valvestate models. This black handle has a thick rubber grip, has the Marshall logo in the center of the handle strap, and is preattached to the two black end caps. 8" center to center mounting holes.  Genuine Marshall™ part number HNDL-90014.  Mounting hardware not included.

Part #MAH-268

 $14.95



Click on photos for
larger view
 GENUINE Marshall™ VINTAGE GOLD/BLACK HANDLE - JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-287

 $19.99  



Click on photos for
larger view
 GENUINE Marshall™ VINTAGE SILVER/BLACK HANDLE -  JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Silver color bracket covers
  • (1) Rubber handle strap with metallic insert, silver ends
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-355

 $19.99



Click on photos for
larger view
 VINTAGE GOLD/BLACK HANDLE REPLACEMENT STRAP - Marshall™ JCM-800 style
The strap part only of handle part number MAH-287.   Used on some early Marshall™ JCM800 series amps.  11 inches, end-to-end.

Part #MHS-295

 $13.95




Click on photos for
larger view
 VINTAGE GOLD HANDLE END CAP - Marshall™ JCM-800 style
One end cap only of handle part number MAH-287.   Used on some early Marshall™ JCM800 series amps.   Sold individually.  Note:   We urge you to also replace the MIC-295 internal clamp at the same time.   These end caps may not lock securely on old internal clamps, making the end caps randomly pop off when lifting the amp by its handle.

Part #MHC-295

 $1.95
(for one end cap)

Quantity:



Click on photos for
larger view
 VINTAGE HANDLE INTERNAL CLAMP - Marshall™ JCM-800 style
One internal clamp only of handle part numbers MAH-287 or MAH-355.   Used on some early Marshall™ JCM800 series amps.   Sold individually.

Part #MIC-295

 $1.60
(for one clamp)

Quantity:



Click on photos for
larger view
 VINTAGE GOLD/BLACK HANDLE - JMP, JTM "PLEXI"
Handle for vintage Marshall™ heads and combo amps.   Replacement for the Genuine Marshall JMP, JTM "Plexi" series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9".
  • Overall length of assembled and mounted handle is 10.7" (272mm).
  • Mounting screws are NOT included

Part #MAH-288

 $23.95  
 


Copyright ©2025 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.

All company names, logos and product names mentioned on these pages are trademarks of their respective owners.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov